PDA

View Full Version : puegoet moped



youngman
06-15-2008, 09:01 AM
anyone know how to properly adjust the carb?

Barry Morris
06-15-2008, 08:14 PM
I'm not a good small engine guy. But.

Does the engine run now??

Most small engines have an idle speed and an idle mixture screw.
The idel mixture atarts at about 1 turn out. Then start the engine and adjust it for best idle, a little on the rich side.

youngman
06-15-2008, 08:35 PM
engine will start sooner or later idles fine but runs rough. I fiddled around with it thinking I could get it running better by adjusteing theonly valve on the carb, but can't get it to run like it did, bought it used a few years ago,never did anything special to store it, had it running and used it for a littlebit the othermorning till I started messing with it
.

Barry Morris
06-15-2008, 10:20 PM
If it's running, then keep running it. It could be gummed up a bit, maybe some carb or injector cleaner wouldn't hurt. But not too much. You might try taking the carb apart and cleaning it. Don't lose any parts!!

Is this an actual pedal type moped??

youngman
06-16-2008, 09:27 AM
yes an actual pedal type moped , thanks