PDA

View Full Version : monitor problem



acetourer19
05-04-2010, 05:35 PM
I turned the computer on and everything was fine and I went to check something a couple hours later and the print had doubled or tripled in size and even adjusting the monitor controls and resolution it still won't return to normal screen size. I hooked up my old 15" monitor and it's ok. Is the other monitor fried ?

axalon2003
05-04-2010, 09:52 PM
Try disconnecting it from the computer, puling the power and then holding the power buton for about 60 seconds. Then plug in the power only and turn it on. It should show a message about no signal detected, and will generally show some coloured bars. If that message is messed up, then yes, your monitor is done.

acetourer19
05-05-2010, 05:56 PM
I'll give it a try .
Thanks
D.D.